commit c8761824aecfc476fe687db02122a3cb69fa2633
parent 4648698978172f77a119359ccf7393b992da0db9
Author: Davide P. Cervone <dpvc@union.edu>
Date: Thu, 3 Mar 2011 16:27:35 -0500
Change default configuration file to config/default.js
Diffstat:
| D | config/MathJax.js | | | 602 | ------------------------------------------------------------------------------- |
| A | config/default.js | | | 602 | +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| D | unpacked/config/MathJax.js | | | 602 | ------------------------------------------------------------------------------- |
| A | unpacked/config/default.js | | | 602 | +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
4 files changed, 1204 insertions(+), 1204 deletions(-)
diff --git a/config/MathJax.js b/config/MathJax.js
@@ -1,602 +0,0 @@
-/*************************************************************
- *
- * MathJax/config/MathJax.js
- *
- * This configuration file is loaded when there is no explicit
- * configuration script in the <script> tag that loads MathJax.js
- *
- * Use it to customize the MathJax settings. See comments below.
- *
- * ---------------------------------------------------------------------
- *
- * Copyright (c) 2009-10 Design Science, Inc.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-
-/*
- * This file lists most, but not all, of the options that can be set for
- * MathJax and its various components. Some additional options are
- * available, however, and are listed in the various links at:
- *
- * http://www.mathjax.org/resources/docs/?configuration.html#configuration-options-by-component
- *
- * You can add these to the configuration object below if you
- * want to change them from their default values.
- */
-
-MathJax.Hub.Config({
-
- //
- // A comma-separated list of configuration files to load
- // when MathJax starts up. E.g., to define local macros, etc.
- // The default directory is the MathJax/config directory.
- //
- // Example: config: ["local/local.js"],
- // Example: config: ["local/local.js","MMLtoHTML.js"],
- //
- config: [],
-
- //
- // A comma-separated list of CSS stylesheet files to be loaded
- // when MathJax starts up. The default directory is the
- // MathJax/config directory.
- //
- // Example: styleSheets: ["MathJax.css"],
- //
- styleSheets: [],
-
- //
- // Styles to be defined dynamically at startup time.
- //
- // Example:
- // styles: {
- // ".MathJax .merror": {
- // color: "blue",
- // "background-color": "green"
- // }
- // },
- //
- styles: {},
-
- //
- // A comma-separated list of input and output jax to initialize at startup.
- // Their main code is loaded only when they are actually used, so it is not
- // inefficient to include jax that may not actually be used on the page. These
- // are found in the MathJax/jax directory.
- //
- jax: ["input/TeX","output/HTML-CSS"],
-
- //
- // A comma-separated list of extensions to load at startup. The default
- // directory is MathJax/extensions.
- //
- // Example: extensions: ["tex2jax.js","TeX/AMSmath.js","TeX/AMSsymbols.js"],
- //
- extensions: ["tex2jax.js"],
-
- //
- // Patterns to remove from before and after math script tags. If you are not
- // using one of the preprocessors (e.g., tex2jax), you need to insert something
- // extra into your HTML file in order to avoid a bug in Internet Explorer. IE
- // removes spaces from the DOM that it thinks are redundent, and since a SCRIPT
- // tag usually doesn't add content to the page, if there is a space before and after
- // a MathJax SCRIPT tag, IE will remove the first space. When MathJax inserts
- // the typeset mathematics, this means there will be no space before it and the
- // preceeding text. In order to avoid this, you should include some "guard characters"
- // before or after the math SCRIPT tag; define the patterns you want to use below.
- // Note that these are used as regular expressions, so you will need to quote
- // special characters. Furthermore, since they are javascript strings, you must
- // quote javascript special characters as well. So to obtain a backslash, you must
- // use \\ (doubled for javascript). For example, "\\[" is the pattern \[ in the
- // regular expression. That means that if you want an actual backslash in your
- // guard characters, you need to use "\\\\" in order to get \\ in the regular
- // expression, and \ in the actual text. If both preJax and postJax are defined,
- // both must be present in order to be removed.
- //
- // See also the preRemoveClass comments below.
- //
- // Example:
- // preJax: "\\\\\\\\", // makes a double backslash the preJax text
- // or
- // preJax: "\\[\\[", // jax scripts must be enclosed in double brackets
- // postJax: "\\]\\]",
- //
- preJax: null,
- postJax: null,
-
- //
- // The CSS class for a math preview to be removed preceeding a MathJax
- // SCRIPT tag. If the tag just before the MathJax SCRIPT tag is of this
- // class, its contents are removed when MathJax processes the SCRIPT
- // tag. This allows you to include a math preview in a form that will
- // be displayed prior to MathJax performing its typesetting. It also
- // avoids the Internet Explorer space-removal bug, and can be used in
- // place of preJax and postJax if that is more convenient.
- //
- // For example
- //
- // <span class="MathJax_Preview">[math]</span><script type="math/tex">...</script>
- //
- // would display "[math]" in place of the math until MathJax is able to typeset it.
- //
- preRemoveClass: "MathJax_Preview",
-
- //
- // This value controls whether the "Processing Math: nn%" message are displayed
- // in the lower left-hand corner. Set to "false" to prevent those messages (though
- // file loading and other messages will still be shown).
- //
- showProcessingMessages: true,
-
- //
- // This value controls the verbosity of the messages in the lower left-hand corner.
- // Set it to "none" to eliminate all messages, or set it to "simple" to show
- // "Loading..." and "Processing..." rather than showing the full file name and the
- // percentage of the mathematics processed.
- //
- messageStyle: "normal",
-
- //
- // These two parameters control the alignment and shifting of displayed equations.
- // The first can be "left", "center", or "right", and determines the alignment of
- // displayed equations. When the alignment is not "center", the second determines
- // an indentation from the left or right side for the displayed equations.
- //
- displayAlign: "center",
- displayIndent: "0em",
-
- //
- // Normally MathJax will perform its starup commands (loading of
- // configuration, styles, jax, and so on) as soon as it can. If you
- // expect to be doing additional configuration on the page, however, you
- // may want to have it wait until the page's onload hander is called. If so,
- // set this to "onload".
- //
- delayStartupUntil: "none",
-
- //
- // Normally MathJax will typeset the mathematics on the page as soon as
- // the page is loaded. If you want to delay that process, in which case
- // you will need to call MathJax.Hub.Typeset() yourself by hand, set
- // this value to true.
- //
- skipStartupTypeset: false,
-
- //============================================================================
- //
- // These parameters control the tex2jax preprocessor (when you have included
- // "tex2jax.js" in the extensions list above).
- //
- tex2jax: {
-
- //
- // The Id of the element to be processed (defaults to full document)
- //
- element: null,
-
- //
- // The delimiters that surround in-line math expressions. The first in each
- // pair is the initial delimiter and the second is the terminal delimiter.
- // Comment out any that you don't want, but be sure there is no extra
- // comma at the end of the last item in the list -- some browsers won't
- // be able to handle that.
- //
- inlineMath: [
-// ['$','$'], // uncomment this for standard TeX math delimiters
- ['\\(','\\)']
- ],
-
- //
- // The delimiters that surround displayed math expressions. The first in each
- // pair is the initial delimiter and the second is the terminal delimiter.
- // Comment out any that you don't want, but be sure there is no extra
- // comma at the end of the last item in the list -- some browsers won't
- // be able to handle that.
- //
- displayMath: [
- ['$$','$$'],
- ['\\[','\\]']
- ],
-
- //
- // This array lists the names of the tags whose contents should not be
- // processed by tex2jax (other than to look for ignore/process classes
- // as listed below). You can add to (or remove from) this list to prevent
- // MathJax from processing mathematics in specific contexts.
- //
- skipTags: ["script","noscript","style","textarea","pre","code"],
-
- //
- // This is the class name used to mark elements whose contents should
- // not be processed by tex2jax (other than to look for the
- // processClass pattern below). Note that this is a regular
- // expression, and so you need to be sure to quote any regexp special
- // characters. The pattern is automatically preceeded by '(^| )(' and
- // followed by ')( |$)', so your pattern will have to match full words
- // in the class name. Assigning an element this class name will
- // prevent `tex2jax` from processing its contents.
- //
- ignoreClass: "tex2jax_ignore",
-
- //
- // This is the class name used to mark elements whose contents SHOULD
- // be processed by tex2jax. This is used to turn on processing within
- // tags that have been marked as ignored or skipped above. Note that
- // this is a regular expression, and so you need to be sure to quote
- // any regexp special characters. The pattern is automatically
- // preceeded by '(^| )(' and followed by ')( |$)', so your pattern
- // will have to match full words in the class name. Use this to
- // restart processing within an element that has been marked as
- // ignored above.
- //
- processClass: "tex2jax_process",
-
- //
- // Set to "true" to allow \$ to produce a dollar without starting in-line
- // math mode. If you uncomment the ['$','$'] line above, you should change
- // this to true so that you can insert plain dollar signs into your documents
- //
- processEscapes: false,
-
- //
- // Controls whether tex2jax processes LaTeX environments outside of math
- // mode. Set to "false" to prevent processing of environments except within
- // math mode.
- //
- processEnvironments: true,
-
- //
- // Controls whether tex2jax inserts MathJax_Preview spans to make a
- // preview available, and what preview to use, when it locates in-line
- // and display mathetics on the page. The default is "TeX", which
- // means use the TeX code as the preview (until it is processed by
- // MathJax). Set to "none" to prevent the previews from being
- // inserted (the math will simply disappear until it is typeset). Set
- // to an array containing the description of an HTML snippet in order
- // to use the same preview for all equations on the page (e.g., you
- // could have it say "[math]" or load an image).
- //
- // E.g., preview: ["[math]"],
- // or preview: [["img",{src: "http://myserver.com/images/mypic.jpg"}]]
- //
- preview: "TeX"
-
- },
-
- //============================================================================
- //
- // These parameters control the mml2jax preprocessor (when you have included
- // "mml2jax.js" in the extensions list above).
- //
- mml2jax: {
-
- //
- // The Id of the element to be processed (defaults to full document)
- //
- element: null,
-
- //
- // Controls whether mml2jax inserts MathJax_Preview spans to make a
- // preview available, and what preview to use, whrn it locates
- // mathematics on the page. The default is "alttext", which means use
- // the <math> tag's alttext attribute as the preview (until it is
- // processed by MathJax), if the tag has one. Set to "none" to
- // prevent the previews from being inserted (the math will simply
- // disappear until it is typeset). Set to an array containing the
- // description of an HTML snippet in order to use the same preview for
- // all equations on the page (e.g., you could have it say "[math]" or
- // load an image).
- //
- // E.g., preview: ["[math]"],
- // or preview: [["img",{src: "http://myserver.com/images/mypic.jpg"}]]
- //
- preview: "alttext"
-
- },
-
- //============================================================================
- //
- // These parameters control the jsMath2jax preprocessor (when you have included
- // "jsMath2jax.js" in the extensions list above).
- //
- jsMath2jax: {
-
- //
- // The Id of the element to be processed (defaults to full document)
- //
- element: null,
-
- //
- // Controls whether jsMath2jax inserts MathJax_Preview spans to make a
- // preview available, and what preview to use, when it locates
- // mathematics on the page. The default is "TeX", which means use the
- // TeX code as the preview (until it is processed by MathJax). Set to
- // "none" to prevent the previews from being inserted (the math will
- // simply disappear until it is typeset). Set to an array containing
- // the description of an HTML snippet in order to use the same preview
- // for all equations on the page (e.g., you could have it say "[math]"
- // or load an image).
- //
- // E.g., preview: ["[math]"],
- // or preview: [["img",{src: "http://myserver.com/images/mypic.jpg"}]]
- //
- preview: "TeX"
-
- },
-
- //============================================================================
- //
- // These parameters control the TeX input jax.
- //
- TeX: {
-
- //
- // This specifies the side on which \tag{} macros will place the tags.
- // Set to "left" to place on the left-hand side.
- //
- TagSide: "right",
-
- //
- // This is the amound of indentation (from right or left) for the tags.
- //
- TagIndent: ".8em",
-
- //
- // This is the width to use for the multline environment
- //
- MultLineWidth: "85%",
-
- //
- // List of macros to define. These are of the form
- // name: value
- // where 'value' is the replacement text for the macro \name.
- // The 'value' can also be [value,n] where 'value' is the replacement
- // text and 'n' is the number of parameters for the macro.
- // Note that backslashes must be doubled in the replacement string.
- //
- // E.g.,
- //
- // Macros: {
- // RR: '{\\bf R}',
- // bold: ['{\\bf #1}', 1]
- // }
- //
- Macros: {}
-
- },
-
- //============================================================================
- //
- // These parameters control the MathML inupt jax.
- //
- MathML: {
- //
- // This specifies whether to use TeX spacing or MathML spacing when the
- // HTML-CSS output jax is used.
- //
- useMathMLspacing: false
- },
-
- //============================================================================
- //
- // These parameters control the HTML-CSS output jax.
- //
- "HTML-CSS": {
-
- //
- // This controls the global scaling of mathematics as compared to the
- // surrounding text. Values between 100 and 133 are usually good choices.
- //
- scale: 100,
-
- //
- // This is a list of the fonts to look for on a user's computer in
- // preference to using MathJax's web-based fonts. These must
- // correspond to directories available in the jax/output/HTML-CSS/fonts
- // directory, where MathJax stores data about the characters available
- // in the fonts. Set this to ["TeX"], for example, to prevent the
- // use of the STIX fonts, or set it to an empty list, [], if
- // you want to force MathJax to use web-based or image fonts.
- //
- availableFonts: ["STIX","TeX"],
-
- //
- // This is the preferred font to use when more than one of those
- // listed above is available.
- //
- preferredFont: "TeX",
-
- //
- // This is the web-based font to use when none of the fonts listed
- // above are available on the user's computer. Note that currently
- // only the TeX font is available in a web-based form. Set this to
- //
- // webFont: null,
- //
- // if you want to prevent the use of web-based fonts.
- //
- webFont: "TeX",
-
- //
- // This is the font to use for image fallback mode (when none of the
- // fonts listed above are available and the browser doesn't support
- // web-fonts via the @font-face CSS directive). Note that currently
- // only the TeX font is available as an image font. Set this to
- //
- // imageFont: null,
- //
- // if you want to prevent the use of image fonts (e.g., you have not
- // installed the image fonts on your server). In this case, only
- // browsers that support web-based fonts will be able to view your pages
- // without having the fonts installed on the client computer. The browsers
- // that support web-based fonts include: IE6 and later, Chrome, Safari3.1
- // and above, Firefox3.5 and later, and Opera10 and later. Note that
- // Firefox3.0 is NOT on this list, so without image fonts, FF3.0 users
- // will be required to to download and install either the STIX fonts or the
- // MathJax TeX fonts.
- //
- imageFont: "TeX",
-
- //
- // This controls whether the MathJax contextual menu will be available
- // on the mathematics in the page. If true, then right-clicking (on
- // the PC) or control-clicking (on the Mac) will produce a MathJax
- // menu that allows you to get the source of the mathematics in
- // various formats, change the size of the mathematics relative to the
- // surrounding text, and get information about MathJax.
- //
- // Set this to false to disable the menu. When true, the MathMenu
- // items below configure the actions of the menu.
- //
- showMathMenu: true,
-
- //
- // This allows you to define or modify the styles used to display
- // various math elements created by MathJax.
- //
- // Example:
- // styles: {
- // ".MathJax_Preview": {
- // "font-size": "80%", // preview uses a smaller font
- // color: "red" // and is in red
- // }
- // }
- //
- styles: {},
-
- //
- // Configuration for <maction> tooltips
- // (see also the #MathJax_Tooltip CSS in MathJax/jax/output/HTML-CSS/config.js,
- // which can be overriden using the styles values above).
- //
- tooltip: {
- delayPost: 600, // milliseconds delay before tooltip is posted after mouseover
- delayClear: 600, // milliseconds delay before tooltip is cleared after mouseout
- offsetX: 10, offsetY: 5 // pixels to offset tooltip from mouse position
- }
- },
-
- //============================================================================
- //
- // These parameters control the NativeMML output jax.
- //
- NativeMML: {
-
- //
- // This controls the global scaling of mathematics as compared to the
- // surrounding text. Values between 100 and 133 are usually good choices.
- //
- scale: 100,
-
- //
- // This controls whether the MathJax contextual menu will be available
- // on the mathematics in the page. If true, then right-clicking (on
- // the PC) or control-clicking (on the Mac) will produce a MathJax
- // menu that allows you to get the source of the mathematics in
- // various formats, change the size of the mathematics relative to the
- // surrounding text, and get information about MathJax.
- //
- // Set this to false to disable the menu. When true, the MathMenu
- // items below configure the actions of the menu.
- //
- // There is a separate setting for MSIE, since the code to handle that
- // is a bit delicate; if it turns out to have unexpected consequences,
- // you can turn it off without turing off other browser support.
- //
- showMathMenu: true,
- showMathMenuMSIE: true,
-
- //
- // This allows you to define or modify the styles used to display
- // various math elements created by MathJax.
- //
- // Example:
- // styles: {
- // ".MathJax_MathML": {
- // color: "red" // MathML is in red
- // }
- // }
- //
- styles: {}
- },
-
- //============================================================================
- //
- // These parameters control the contextual menus that are available on the
- // mathematics within the page (provided the showMathMenu value is true above).
- //
- MathMenu: {
- //
- // This is the hover delay for the display of submenus in the
- // contextual menu. When the mouse is still over a submenu label for
- // this long, the menu will appear. (The menu also will appear if you
- // click on the label.) It is in milliseconds.
- //
- delay: 400,
-
- //
- // This is the URL for the MathJax Help menu item.
- //
- helpURL: "http://www.mathjax.org/help/user/",
-
- //
- // These control whether the "Math Renderer", "Font Preferences",
- // and "Contextual Menu" submenus will be displayed or not.
- //
- showRenderer: true,
- showFontMenu: false,
- showContext: false,
-
- //
- // These are the settings for the Show Source window. The initial
- // width and height will be reset after the source is shown in an
- // attempt to make the window fit the output better.
- //
- windowSettings: {
- status: "no", toolbar: "no", locationbar: "no", menubar: "no",
- directories: "no", personalbar: "no", resizable: "yes", scrollbars: "yes",
- width: 100, height: 50
- },
-
- //
- // This allows you to change the CSS that controls the menu
- // appearance. See the extensions/MathMenu.js file for details
- // of the default settings.
- //
- styles: {}
-
- },
-
- //============================================================================
- //
- // These parameters control the MMLorHTML configuration file.
- // NOTE: if you add MMLorHTML.js to the config array above,
- // you must REMOVE the output jax from the jax array.
- //
- MMLorHTML: {
- //
- // The output jax that is to be preferred when both are possible
- // (set to "MML" for native MathML, "HTML" for MathJax's HTML-CSS output jax).
- //
- prefer: {
- MSIE: "MML",
- Firefox: "MML",
- Opera: "HTML",
- other: "HTML"
- }
- }
-});
-
-MathJax.Ajax.loadComplete("[MathJax]/config/MathJax.js");
diff --git a/config/default.js b/config/default.js
@@ -0,0 +1,602 @@
+/*************************************************************
+ *
+ * MathJax/config/default.js
+ *
+ * This configuration file is loaded when there is no explicit
+ * configuration script in the <script> tag that loads MathJax.js
+ *
+ * Use it to customize the MathJax settings. See comments below.
+ *
+ * ---------------------------------------------------------------------
+ *
+ * Copyright (c) 2009-2011 Design Science, Inc.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+/*
+ * This file lists most, but not all, of the options that can be set for
+ * MathJax and its various components. Some additional options are
+ * available, however, and are listed in the various links at:
+ *
+ * http://www.mathjax.org/resources/docs/?configuration.html#configuration-options-by-component
+ *
+ * You can add these to the configuration object below if you
+ * want to change them from their default values.
+ */
+
+MathJax.Hub.Config({
+
+ //
+ // A comma-separated list of configuration files to load
+ // when MathJax starts up. E.g., to define local macros, etc.
+ // The default directory is the MathJax/config directory.
+ //
+ // Example: config: ["local/local.js"],
+ // Example: config: ["local/local.js","MMLtoHTML.js"],
+ //
+ config: [],
+
+ //
+ // A comma-separated list of CSS stylesheet files to be loaded
+ // when MathJax starts up. The default directory is the
+ // MathJax/config directory.
+ //
+ // Example: styleSheets: ["MathJax.css"],
+ //
+ styleSheets: [],
+
+ //
+ // Styles to be defined dynamically at startup time.
+ //
+ // Example:
+ // styles: {
+ // ".MathJax .merror": {
+ // color: "blue",
+ // "background-color": "green"
+ // }
+ // },
+ //
+ styles: {},
+
+ //
+ // A comma-separated list of input and output jax to initialize at startup.
+ // Their main code is loaded only when they are actually used, so it is not
+ // inefficient to include jax that may not actually be used on the page. These
+ // are found in the MathJax/jax directory.
+ //
+ jax: ["input/TeX","output/HTML-CSS"],
+
+ //
+ // A comma-separated list of extensions to load at startup. The default
+ // directory is MathJax/extensions.
+ //
+ // Example: extensions: ["tex2jax.js","TeX/AMSmath.js","TeX/AMSsymbols.js"],
+ //
+ extensions: ["tex2jax.js"],
+
+ //
+ // Patterns to remove from before and after math script tags. If you are not
+ // using one of the preprocessors (e.g., tex2jax), you need to insert something
+ // extra into your HTML file in order to avoid a bug in Internet Explorer. IE
+ // removes spaces from the DOM that it thinks are redundent, and since a SCRIPT
+ // tag usually doesn't add content to the page, if there is a space before and after
+ // a MathJax SCRIPT tag, IE will remove the first space. When MathJax inserts
+ // the typeset mathematics, this means there will be no space before it and the
+ // preceeding text. In order to avoid this, you should include some "guard characters"
+ // before or after the math SCRIPT tag; define the patterns you want to use below.
+ // Note that these are used as regular expressions, so you will need to quote
+ // special characters. Furthermore, since they are javascript strings, you must
+ // quote javascript special characters as well. So to obtain a backslash, you must
+ // use \\ (doubled for javascript). For example, "\\[" is the pattern \[ in the
+ // regular expression. That means that if you want an actual backslash in your
+ // guard characters, you need to use "\\\\" in order to get \\ in the regular
+ // expression, and \ in the actual text. If both preJax and postJax are defined,
+ // both must be present in order to be removed.
+ //
+ // See also the preRemoveClass comments below.
+ //
+ // Example:
+ // preJax: "\\\\\\\\", // makes a double backslash the preJax text
+ // or
+ // preJax: "\\[\\[", // jax scripts must be enclosed in double brackets
+ // postJax: "\\]\\]",
+ //
+ preJax: null,
+ postJax: null,
+
+ //
+ // The CSS class for a math preview to be removed preceeding a MathJax
+ // SCRIPT tag. If the tag just before the MathJax SCRIPT tag is of this
+ // class, its contents are removed when MathJax processes the SCRIPT
+ // tag. This allows you to include a math preview in a form that will
+ // be displayed prior to MathJax performing its typesetting. It also
+ // avoids the Internet Explorer space-removal bug, and can be used in
+ // place of preJax and postJax if that is more convenient.
+ //
+ // For example
+ //
+ // <span class="MathJax_Preview">[math]</span><script type="math/tex">...</script>
+ //
+ // would display "[math]" in place of the math until MathJax is able to typeset it.
+ //
+ preRemoveClass: "MathJax_Preview",
+
+ //
+ // This value controls whether the "Processing Math: nn%" message are displayed
+ // in the lower left-hand corner. Set to "false" to prevent those messages (though
+ // file loading and other messages will still be shown).
+ //
+ showProcessingMessages: true,
+
+ //
+ // This value controls the verbosity of the messages in the lower left-hand corner.
+ // Set it to "none" to eliminate all messages, or set it to "simple" to show
+ // "Loading..." and "Processing..." rather than showing the full file name and the
+ // percentage of the mathematics processed.
+ //
+ messageStyle: "normal",
+
+ //
+ // These two parameters control the alignment and shifting of displayed equations.
+ // The first can be "left", "center", or "right", and determines the alignment of
+ // displayed equations. When the alignment is not "center", the second determines
+ // an indentation from the left or right side for the displayed equations.
+ //
+ displayAlign: "center",
+ displayIndent: "0em",
+
+ //
+ // Normally MathJax will perform its starup commands (loading of
+ // configuration, styles, jax, and so on) as soon as it can. If you
+ // expect to be doing additional configuration on the page, however, you
+ // may want to have it wait until the page's onload hander is called. If so,
+ // set this to "onload".
+ //
+ delayStartupUntil: "none",
+
+ //
+ // Normally MathJax will typeset the mathematics on the page as soon as
+ // the page is loaded. If you want to delay that process, in which case
+ // you will need to call MathJax.Hub.Typeset() yourself by hand, set
+ // this value to true.
+ //
+ skipStartupTypeset: false,
+
+ //============================================================================
+ //
+ // These parameters control the tex2jax preprocessor (when you have included
+ // "tex2jax.js" in the extensions list above).
+ //
+ tex2jax: {
+
+ //
+ // The Id of the element to be processed (defaults to full document)
+ //
+ element: null,
+
+ //
+ // The delimiters that surround in-line math expressions. The first in each
+ // pair is the initial delimiter and the second is the terminal delimiter.
+ // Comment out any that you don't want, but be sure there is no extra
+ // comma at the end of the last item in the list -- some browsers won't
+ // be able to handle that.
+ //
+ inlineMath: [
+// ['$','$'], // uncomment this for standard TeX math delimiters
+ ['\\(','\\)']
+ ],
+
+ //
+ // The delimiters that surround displayed math expressions. The first in each
+ // pair is the initial delimiter and the second is the terminal delimiter.
+ // Comment out any that you don't want, but be sure there is no extra
+ // comma at the end of the last item in the list -- some browsers won't
+ // be able to handle that.
+ //
+ displayMath: [
+ ['$$','$$'],
+ ['\\[','\\]']
+ ],
+
+ //
+ // This array lists the names of the tags whose contents should not be
+ // processed by tex2jax (other than to look for ignore/process classes
+ // as listed below). You can add to (or remove from) this list to prevent
+ // MathJax from processing mathematics in specific contexts.
+ //
+ skipTags: ["script","noscript","style","textarea","pre","code"],
+
+ //
+ // This is the class name used to mark elements whose contents should
+ // not be processed by tex2jax (other than to look for the
+ // processClass pattern below). Note that this is a regular
+ // expression, and so you need to be sure to quote any regexp special
+ // characters. The pattern is automatically preceeded by '(^| )(' and
+ // followed by ')( |$)', so your pattern will have to match full words
+ // in the class name. Assigning an element this class name will
+ // prevent `tex2jax` from processing its contents.
+ //
+ ignoreClass: "tex2jax_ignore",
+
+ //
+ // This is the class name used to mark elements whose contents SHOULD
+ // be processed by tex2jax. This is used to turn on processing within
+ // tags that have been marked as ignored or skipped above. Note that
+ // this is a regular expression, and so you need to be sure to quote
+ // any regexp special characters. The pattern is automatically
+ // preceeded by '(^| )(' and followed by ')( |$)', so your pattern
+ // will have to match full words in the class name. Use this to
+ // restart processing within an element that has been marked as
+ // ignored above.
+ //
+ processClass: "tex2jax_process",
+
+ //
+ // Set to "true" to allow \$ to produce a dollar without starting in-line
+ // math mode. If you uncomment the ['$','$'] line above, you should change
+ // this to true so that you can insert plain dollar signs into your documents
+ //
+ processEscapes: false,
+
+ //
+ // Controls whether tex2jax processes LaTeX environments outside of math
+ // mode. Set to "false" to prevent processing of environments except within
+ // math mode.
+ //
+ processEnvironments: true,
+
+ //
+ // Controls whether tex2jax inserts MathJax_Preview spans to make a
+ // preview available, and what preview to use, when it locates in-line
+ // and display mathetics on the page. The default is "TeX", which
+ // means use the TeX code as the preview (until it is processed by
+ // MathJax). Set to "none" to prevent the previews from being
+ // inserted (the math will simply disappear until it is typeset). Set
+ // to an array containing the description of an HTML snippet in order
+ // to use the same preview for all equations on the page (e.g., you
+ // could have it say "[math]" or load an image).
+ //
+ // E.g., preview: ["[math]"],
+ // or preview: [["img",{src: "http://myserver.com/images/mypic.jpg"}]]
+ //
+ preview: "TeX"
+
+ },
+
+ //============================================================================
+ //
+ // These parameters control the mml2jax preprocessor (when you have included
+ // "mml2jax.js" in the extensions list above).
+ //
+ mml2jax: {
+
+ //
+ // The Id of the element to be processed (defaults to full document)
+ //
+ element: null,
+
+ //
+ // Controls whether mml2jax inserts MathJax_Preview spans to make a
+ // preview available, and what preview to use, whrn it locates
+ // mathematics on the page. The default is "alttext", which means use
+ // the <math> tag's alttext attribute as the preview (until it is
+ // processed by MathJax), if the tag has one. Set to "none" to
+ // prevent the previews from being inserted (the math will simply
+ // disappear until it is typeset). Set to an array containing the
+ // description of an HTML snippet in order to use the same preview for
+ // all equations on the page (e.g., you could have it say "[math]" or
+ // load an image).
+ //
+ // E.g., preview: ["[math]"],
+ // or preview: [["img",{src: "http://myserver.com/images/mypic.jpg"}]]
+ //
+ preview: "alttext"
+
+ },
+
+ //============================================================================
+ //
+ // These parameters control the jsMath2jax preprocessor (when you have included
+ // "jsMath2jax.js" in the extensions list above).
+ //
+ jsMath2jax: {
+
+ //
+ // The Id of the element to be processed (defaults to full document)
+ //
+ element: null,
+
+ //
+ // Controls whether jsMath2jax inserts MathJax_Preview spans to make a
+ // preview available, and what preview to use, when it locates
+ // mathematics on the page. The default is "TeX", which means use the
+ // TeX code as the preview (until it is processed by MathJax). Set to
+ // "none" to prevent the previews from being inserted (the math will
+ // simply disappear until it is typeset). Set to an array containing
+ // the description of an HTML snippet in order to use the same preview
+ // for all equations on the page (e.g., you could have it say "[math]"
+ // or load an image).
+ //
+ // E.g., preview: ["[math]"],
+ // or preview: [["img",{src: "http://myserver.com/images/mypic.jpg"}]]
+ //
+ preview: "TeX"
+
+ },
+
+ //============================================================================
+ //
+ // These parameters control the TeX input jax.
+ //
+ TeX: {
+
+ //
+ // This specifies the side on which \tag{} macros will place the tags.
+ // Set to "left" to place on the left-hand side.
+ //
+ TagSide: "right",
+
+ //
+ // This is the amound of indentation (from right or left) for the tags.
+ //
+ TagIndent: ".8em",
+
+ //
+ // This is the width to use for the multline environment
+ //
+ MultLineWidth: "85%",
+
+ //
+ // List of macros to define. These are of the form
+ // name: value
+ // where 'value' is the replacement text for the macro \name.
+ // The 'value' can also be [value,n] where 'value' is the replacement
+ // text and 'n' is the number of parameters for the macro.
+ // Note that backslashes must be doubled in the replacement string.
+ //
+ // E.g.,
+ //
+ // Macros: {
+ // RR: '{\\bf R}',
+ // bold: ['{\\bf #1}', 1]
+ // }
+ //
+ Macros: {}
+
+ },
+
+ //============================================================================
+ //
+ // These parameters control the MathML inupt jax.
+ //
+ MathML: {
+ //
+ // This specifies whether to use TeX spacing or MathML spacing when the
+ // HTML-CSS output jax is used.
+ //
+ useMathMLspacing: false
+ },
+
+ //============================================================================
+ //
+ // These parameters control the HTML-CSS output jax.
+ //
+ "HTML-CSS": {
+
+ //
+ // This controls the global scaling of mathematics as compared to the
+ // surrounding text. Values between 100 and 133 are usually good choices.
+ //
+ scale: 100,
+
+ //
+ // This is a list of the fonts to look for on a user's computer in
+ // preference to using MathJax's web-based fonts. These must
+ // correspond to directories available in the jax/output/HTML-CSS/fonts
+ // directory, where MathJax stores data about the characters available
+ // in the fonts. Set this to ["TeX"], for example, to prevent the
+ // use of the STIX fonts, or set it to an empty list, [], if
+ // you want to force MathJax to use web-based or image fonts.
+ //
+ availableFonts: ["STIX","TeX"],
+
+ //
+ // This is the preferred font to use when more than one of those
+ // listed above is available.
+ //
+ preferredFont: "TeX",
+
+ //
+ // This is the web-based font to use when none of the fonts listed
+ // above are available on the user's computer. Note that currently
+ // only the TeX font is available in a web-based form. Set this to
+ //
+ // webFont: null,
+ //
+ // if you want to prevent the use of web-based fonts.
+ //
+ webFont: "TeX",
+
+ //
+ // This is the font to use for image fallback mode (when none of the
+ // fonts listed above are available and the browser doesn't support
+ // web-fonts via the @font-face CSS directive). Note that currently
+ // only the TeX font is available as an image font. Set this to
+ //
+ // imageFont: null,
+ //
+ // if you want to prevent the use of image fonts (e.g., you have not
+ // installed the image fonts on your server). In this case, only
+ // browsers that support web-based fonts will be able to view your pages
+ // without having the fonts installed on the client computer. The browsers
+ // that support web-based fonts include: IE6 and later, Chrome, Safari3.1
+ // and above, Firefox3.5 and later, and Opera10 and later. Note that
+ // Firefox3.0 is NOT on this list, so without image fonts, FF3.0 users
+ // will be required to to download and install either the STIX fonts or the
+ // MathJax TeX fonts.
+ //
+ imageFont: "TeX",
+
+ //
+ // This controls whether the MathJax contextual menu will be available
+ // on the mathematics in the page. If true, then right-clicking (on
+ // the PC) or control-clicking (on the Mac) will produce a MathJax
+ // menu that allows you to get the source of the mathematics in
+ // various formats, change the size of the mathematics relative to the
+ // surrounding text, and get information about MathJax.
+ //
+ // Set this to false to disable the menu. When true, the MathMenu
+ // items below configure the actions of the menu.
+ //
+ showMathMenu: true,
+
+ //
+ // This allows you to define or modify the styles used to display
+ // various math elements created by MathJax.
+ //
+ // Example:
+ // styles: {
+ // ".MathJax_Preview": {
+ // "font-size": "80%", // preview uses a smaller font
+ // color: "red" // and is in red
+ // }
+ // }
+ //
+ styles: {},
+
+ //
+ // Configuration for <maction> tooltips
+ // (see also the #MathJax_Tooltip CSS in MathJax/jax/output/HTML-CSS/config.js,
+ // which can be overriden using the styles values above).
+ //
+ tooltip: {
+ delayPost: 600, // milliseconds delay before tooltip is posted after mouseover
+ delayClear: 600, // milliseconds delay before tooltip is cleared after mouseout
+ offsetX: 10, offsetY: 5 // pixels to offset tooltip from mouse position
+ }
+ },
+
+ //============================================================================
+ //
+ // These parameters control the NativeMML output jax.
+ //
+ NativeMML: {
+
+ //
+ // This controls the global scaling of mathematics as compared to the
+ // surrounding text. Values between 100 and 133 are usually good choices.
+ //
+ scale: 100,
+
+ //
+ // This controls whether the MathJax contextual menu will be available
+ // on the mathematics in the page. If true, then right-clicking (on
+ // the PC) or control-clicking (on the Mac) will produce a MathJax
+ // menu that allows you to get the source of the mathematics in
+ // various formats, change the size of the mathematics relative to the
+ // surrounding text, and get information about MathJax.
+ //
+ // Set this to false to disable the menu. When true, the MathMenu
+ // items below configure the actions of the menu.
+ //
+ // There is a separate setting for MSIE, since the code to handle that
+ // is a bit delicate; if it turns out to have unexpected consequences,
+ // you can turn it off without turing off other browser support.
+ //
+ showMathMenu: true,
+ showMathMenuMSIE: true,
+
+ //
+ // This allows you to define or modify the styles used to display
+ // various math elements created by MathJax.
+ //
+ // Example:
+ // styles: {
+ // ".MathJax_MathML": {
+ // color: "red" // MathML is in red
+ // }
+ // }
+ //
+ styles: {}
+ },
+
+ //============================================================================
+ //
+ // These parameters control the contextual menus that are available on the
+ // mathematics within the page (provided the showMathMenu value is true above).
+ //
+ MathMenu: {
+ //
+ // This is the hover delay for the display of submenus in the
+ // contextual menu. When the mouse is still over a submenu label for
+ // this long, the menu will appear. (The menu also will appear if you
+ // click on the label.) It is in milliseconds.
+ //
+ delay: 400,
+
+ //
+ // This is the URL for the MathJax Help menu item.
+ //
+ helpURL: "http://www.mathjax.org/help/user/",
+
+ //
+ // These control whether the "Math Renderer", "Font Preferences",
+ // and "Contextual Menu" submenus will be displayed or not.
+ //
+ showRenderer: true,
+ showFontMenu: false,
+ showContext: false,
+
+ //
+ // These are the settings for the Show Source window. The initial
+ // width and height will be reset after the source is shown in an
+ // attempt to make the window fit the output better.
+ //
+ windowSettings: {
+ status: "no", toolbar: "no", locationbar: "no", menubar: "no",
+ directories: "no", personalbar: "no", resizable: "yes", scrollbars: "yes",
+ width: 100, height: 50
+ },
+
+ //
+ // This allows you to change the CSS that controls the menu
+ // appearance. See the extensions/MathMenu.js file for details
+ // of the default settings.
+ //
+ styles: {}
+
+ },
+
+ //============================================================================
+ //
+ // These parameters control the MMLorHTML configuration file.
+ // NOTE: if you add MMLorHTML.js to the config array above,
+ // you must REMOVE the output jax from the jax array.
+ //
+ MMLorHTML: {
+ //
+ // The output jax that is to be preferred when both are possible
+ // (set to "MML" for native MathML, "HTML" for MathJax's HTML-CSS output jax).
+ //
+ prefer: {
+ MSIE: "MML",
+ Firefox: "MML",
+ Opera: "HTML",
+ other: "HTML"
+ }
+ }
+});
+
+MathJax.Ajax.loadComplete("[MathJax]/config/default.js");
diff --git a/unpacked/config/MathJax.js b/unpacked/config/MathJax.js
@@ -1,602 +0,0 @@
-/*************************************************************
- *
- * MathJax/config/MathJax.js
- *
- * This configuration file is loaded when there is no explicit
- * configuration script in the <script> tag that loads MathJax.js
- *
- * Use it to customize the MathJax settings. See comments below.
- *
- * ---------------------------------------------------------------------
- *
- * Copyright (c) 2009-10 Design Science, Inc.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-
-/*
- * This file lists most, but not all, of the options that can be set for
- * MathJax and its various components. Some additional options are
- * available, however, and are listed in the various links at:
- *
- * http://www.mathjax.org/resources/docs/?configuration.html#configuration-options-by-component
- *
- * You can add these to the configuration object below if you
- * want to change them from their default values.
- */
-
-MathJax.Hub.Config({
-
- //
- // A comma-separated list of configuration files to load
- // when MathJax starts up. E.g., to define local macros, etc.
- // The default directory is the MathJax/config directory.
- //
- // Example: config: ["local/local.js"],
- // Example: config: ["local/local.js","MMLtoHTML.js"],
- //
- config: [],
-
- //
- // A comma-separated list of CSS stylesheet files to be loaded
- // when MathJax starts up. The default directory is the
- // MathJax/config directory.
- //
- // Example: styleSheets: ["MathJax.css"],
- //
- styleSheets: [],
-
- //
- // Styles to be defined dynamically at startup time.
- //
- // Example:
- // styles: {
- // ".MathJax .merror": {
- // color: "blue",
- // "background-color": "green"
- // }
- // },
- //
- styles: {},
-
- //
- // A comma-separated list of input and output jax to initialize at startup.
- // Their main code is loaded only when they are actually used, so it is not
- // inefficient to include jax that may not actually be used on the page. These
- // are found in the MathJax/jax directory.
- //
- jax: ["input/TeX","output/HTML-CSS"],
-
- //
- // A comma-separated list of extensions to load at startup. The default
- // directory is MathJax/extensions.
- //
- // Example: extensions: ["tex2jax.js","TeX/AMSmath.js","TeX/AMSsymbols.js"],
- //
- extensions: ["tex2jax.js"],
-
- //
- // Patterns to remove from before and after math script tags. If you are not
- // using one of the preprocessors (e.g., tex2jax), you need to insert something
- // extra into your HTML file in order to avoid a bug in Internet Explorer. IE
- // removes spaces from the DOM that it thinks are redundent, and since a SCRIPT
- // tag usually doesn't add content to the page, if there is a space before and after
- // a MathJax SCRIPT tag, IE will remove the first space. When MathJax inserts
- // the typeset mathematics, this means there will be no space before it and the
- // preceeding text. In order to avoid this, you should include some "guard characters"
- // before or after the math SCRIPT tag; define the patterns you want to use below.
- // Note that these are used as regular expressions, so you will need to quote
- // special characters. Furthermore, since they are javascript strings, you must
- // quote javascript special characters as well. So to obtain a backslash, you must
- // use \\ (doubled for javascript). For example, "\\[" is the pattern \[ in the
- // regular expression. That means that if you want an actual backslash in your
- // guard characters, you need to use "\\\\" in order to get \\ in the regular
- // expression, and \ in the actual text. If both preJax and postJax are defined,
- // both must be present in order to be removed.
- //
- // See also the preRemoveClass comments below.
- //
- // Example:
- // preJax: "\\\\\\\\", // makes a double backslash the preJax text
- // or
- // preJax: "\\[\\[", // jax scripts must be enclosed in double brackets
- // postJax: "\\]\\]",
- //
- preJax: null,
- postJax: null,
-
- //
- // The CSS class for a math preview to be removed preceeding a MathJax
- // SCRIPT tag. If the tag just before the MathJax SCRIPT tag is of this
- // class, its contents are removed when MathJax processes the SCRIPT
- // tag. This allows you to include a math preview in a form that will
- // be displayed prior to MathJax performing its typesetting. It also
- // avoids the Internet Explorer space-removal bug, and can be used in
- // place of preJax and postJax if that is more convenient.
- //
- // For example
- //
- // <span class="MathJax_Preview">[math]</span><script type="math/tex">...</script>
- //
- // would display "[math]" in place of the math until MathJax is able to typeset it.
- //
- preRemoveClass: "MathJax_Preview",
-
- //
- // This value controls whether the "Processing Math: nn%" message are displayed
- // in the lower left-hand corner. Set to "false" to prevent those messages (though
- // file loading and other messages will still be shown).
- //
- showProcessingMessages: true,
-
- //
- // This value controls the verbosity of the messages in the lower left-hand corner.
- // Set it to "none" to eliminate all messages, or set it to "simple" to show
- // "Loading..." and "Processing..." rather than showing the full file name and the
- // percentage of the mathematics processed.
- //
- messageStyle: "normal",
-
- //
- // These two parameters control the alignment and shifting of displayed equations.
- // The first can be "left", "center", or "right", and determines the alignment of
- // displayed equations. When the alignment is not "center", the second determines
- // an indentation from the left or right side for the displayed equations.
- //
- displayAlign: "center",
- displayIndent: "0em",
-
- //
- // Normally MathJax will perform its starup commands (loading of
- // configuration, styles, jax, and so on) as soon as it can. If you
- // expect to be doing additional configuration on the page, however, you
- // may want to have it wait until the page's onload hander is called. If so,
- // set this to "onload".
- //
- delayStartupUntil: "none",
-
- //
- // Normally MathJax will typeset the mathematics on the page as soon as
- // the page is loaded. If you want to delay that process, in which case
- // you will need to call MathJax.Hub.Typeset() yourself by hand, set
- // this value to true.
- //
- skipStartupTypeset: false,
-
- //============================================================================
- //
- // These parameters control the tex2jax preprocessor (when you have included
- // "tex2jax.js" in the extensions list above).
- //
- tex2jax: {
-
- //
- // The Id of the element to be processed (defaults to full document)
- //
- element: null,
-
- //
- // The delimiters that surround in-line math expressions. The first in each
- // pair is the initial delimiter and the second is the terminal delimiter.
- // Comment out any that you don't want, but be sure there is no extra
- // comma at the end of the last item in the list -- some browsers won't
- // be able to handle that.
- //
- inlineMath: [
-// ['$','$'], // uncomment this for standard TeX math delimiters
- ['\\(','\\)']
- ],
-
- //
- // The delimiters that surround displayed math expressions. The first in each
- // pair is the initial delimiter and the second is the terminal delimiter.
- // Comment out any that you don't want, but be sure there is no extra
- // comma at the end of the last item in the list -- some browsers won't
- // be able to handle that.
- //
- displayMath: [
- ['$$','$$'],
- ['\\[','\\]']
- ],
-
- //
- // This array lists the names of the tags whose contents should not be
- // processed by tex2jax (other than to look for ignore/process classes
- // as listed below). You can add to (or remove from) this list to prevent
- // MathJax from processing mathematics in specific contexts.
- //
- skipTags: ["script","noscript","style","textarea","pre","code"],
-
- //
- // This is the class name used to mark elements whose contents should
- // not be processed by tex2jax (other than to look for the
- // processClass pattern below). Note that this is a regular
- // expression, and so you need to be sure to quote any regexp special
- // characters. The pattern is automatically preceeded by '(^| )(' and
- // followed by ')( |$)', so your pattern will have to match full words
- // in the class name. Assigning an element this class name will
- // prevent `tex2jax` from processing its contents.
- //
- ignoreClass: "tex2jax_ignore",
-
- //
- // This is the class name used to mark elements whose contents SHOULD
- // be processed by tex2jax. This is used to turn on processing within
- // tags that have been marked as ignored or skipped above. Note that
- // this is a regular expression, and so you need to be sure to quote
- // any regexp special characters. The pattern is automatically
- // preceeded by '(^| )(' and followed by ')( |$)', so your pattern
- // will have to match full words in the class name. Use this to
- // restart processing within an element that has been marked as
- // ignored above.
- //
- processClass: "tex2jax_process",
-
- //
- // Set to "true" to allow \$ to produce a dollar without starting in-line
- // math mode. If you uncomment the ['$','$'] line above, you should change
- // this to true so that you can insert plain dollar signs into your documents
- //
- processEscapes: false,
-
- //
- // Controls whether tex2jax processes LaTeX environments outside of math
- // mode. Set to "false" to prevent processing of environments except within
- // math mode.
- //
- processEnvironments: true,
-
- //
- // Controls whether tex2jax inserts MathJax_Preview spans to make a
- // preview available, and what preview to use, when it locates in-line
- // and display mathetics on the page. The default is "TeX", which
- // means use the TeX code as the preview (until it is processed by
- // MathJax). Set to "none" to prevent the previews from being
- // inserted (the math will simply disappear until it is typeset). Set
- // to an array containing the description of an HTML snippet in order
- // to use the same preview for all equations on the page (e.g., you
- // could have it say "[math]" or load an image).
- //
- // E.g., preview: ["[math]"],
- // or preview: [["img",{src: "http://myserver.com/images/mypic.jpg"}]]
- //
- preview: "TeX"
-
- },
-
- //============================================================================
- //
- // These parameters control the mml2jax preprocessor (when you have included
- // "mml2jax.js" in the extensions list above).
- //
- mml2jax: {
-
- //
- // The Id of the element to be processed (defaults to full document)
- //
- element: null,
-
- //
- // Controls whether mml2jax inserts MathJax_Preview spans to make a
- // preview available, and what preview to use, whrn it locates
- // mathematics on the page. The default is "alttext", which means use
- // the <math> tag's alttext attribute as the preview (until it is
- // processed by MathJax), if the tag has one. Set to "none" to
- // prevent the previews from being inserted (the math will simply
- // disappear until it is typeset). Set to an array containing the
- // description of an HTML snippet in order to use the same preview for
- // all equations on the page (e.g., you could have it say "[math]" or
- // load an image).
- //
- // E.g., preview: ["[math]"],
- // or preview: [["img",{src: "http://myserver.com/images/mypic.jpg"}]]
- //
- preview: "alttext"
-
- },
-
- //============================================================================
- //
- // These parameters control the jsMath2jax preprocessor (when you have included
- // "jsMath2jax.js" in the extensions list above).
- //
- jsMath2jax: {
-
- //
- // The Id of the element to be processed (defaults to full document)
- //
- element: null,
-
- //
- // Controls whether jsMath2jax inserts MathJax_Preview spans to make a
- // preview available, and what preview to use, when it locates
- // mathematics on the page. The default is "TeX", which means use the
- // TeX code as the preview (until it is processed by MathJax). Set to
- // "none" to prevent the previews from being inserted (the math will
- // simply disappear until it is typeset). Set to an array containing
- // the description of an HTML snippet in order to use the same preview
- // for all equations on the page (e.g., you could have it say "[math]"
- // or load an image).
- //
- // E.g., preview: ["[math]"],
- // or preview: [["img",{src: "http://myserver.com/images/mypic.jpg"}]]
- //
- preview: "TeX"
-
- },
-
- //============================================================================
- //
- // These parameters control the TeX input jax.
- //
- TeX: {
-
- //
- // This specifies the side on which \tag{} macros will place the tags.
- // Set to "left" to place on the left-hand side.
- //
- TagSide: "right",
-
- //
- // This is the amound of indentation (from right or left) for the tags.
- //
- TagIndent: ".8em",
-
- //
- // This is the width to use for the multline environment
- //
- MultLineWidth: "85%",
-
- //
- // List of macros to define. These are of the form
- // name: value
- // where 'value' is the replacement text for the macro \name.
- // The 'value' can also be [value,n] where 'value' is the replacement
- // text and 'n' is the number of parameters for the macro.
- // Note that backslashes must be doubled in the replacement string.
- //
- // E.g.,
- //
- // Macros: {
- // RR: '{\\bf R}',
- // bold: ['{\\bf #1}', 1]
- // }
- //
- Macros: {}
-
- },
-
- //============================================================================
- //
- // These parameters control the MathML inupt jax.
- //
- MathML: {
- //
- // This specifies whether to use TeX spacing or MathML spacing when the
- // HTML-CSS output jax is used.
- //
- useMathMLspacing: false
- },
-
- //============================================================================
- //
- // These parameters control the HTML-CSS output jax.
- //
- "HTML-CSS": {
-
- //
- // This controls the global scaling of mathematics as compared to the
- // surrounding text. Values between 100 and 133 are usually good choices.
- //
- scale: 100,
-
- //
- // This is a list of the fonts to look for on a user's computer in
- // preference to using MathJax's web-based fonts. These must
- // correspond to directories available in the jax/output/HTML-CSS/fonts
- // directory, where MathJax stores data about the characters available
- // in the fonts. Set this to ["TeX"], for example, to prevent the
- // use of the STIX fonts, or set it to an empty list, [], if
- // you want to force MathJax to use web-based or image fonts.
- //
- availableFonts: ["STIX","TeX"],
-
- //
- // This is the preferred font to use when more than one of those
- // listed above is available.
- //
- preferredFont: "TeX",
-
- //
- // This is the web-based font to use when none of the fonts listed
- // above are available on the user's computer. Note that currently
- // only the TeX font is available in a web-based form. Set this to
- //
- // webFont: null,
- //
- // if you want to prevent the use of web-based fonts.
- //
- webFont: "TeX",
-
- //
- // This is the font to use for image fallback mode (when none of the
- // fonts listed above are available and the browser doesn't support
- // web-fonts via the @font-face CSS directive). Note that currently
- // only the TeX font is available as an image font. Set this to
- //
- // imageFont: null,
- //
- // if you want to prevent the use of image fonts (e.g., you have not
- // installed the image fonts on your server). In this case, only
- // browsers that support web-based fonts will be able to view your pages
- // without having the fonts installed on the client computer. The browsers
- // that support web-based fonts include: IE6 and later, Chrome, Safari3.1
- // and above, Firefox3.5 and later, and Opera10 and later. Note that
- // Firefox3.0 is NOT on this list, so without image fonts, FF3.0 users
- // will be required to to download and install either the STIX fonts or the
- // MathJax TeX fonts.
- //
- imageFont: "TeX",
-
- //
- // This controls whether the MathJax contextual menu will be available
- // on the mathematics in the page. If true, then right-clicking (on
- // the PC) or control-clicking (on the Mac) will produce a MathJax
- // menu that allows you to get the source of the mathematics in
- // various formats, change the size of the mathematics relative to the
- // surrounding text, and get information about MathJax.
- //
- // Set this to false to disable the menu. When true, the MathMenu
- // items below configure the actions of the menu.
- //
- showMathMenu: true,
-
- //
- // This allows you to define or modify the styles used to display
- // various math elements created by MathJax.
- //
- // Example:
- // styles: {
- // ".MathJax_Preview": {
- // "font-size": "80%", // preview uses a smaller font
- // color: "red" // and is in red
- // }
- // }
- //
- styles: {},
-
- //
- // Configuration for <maction> tooltips
- // (see also the #MathJax_Tooltip CSS in MathJax/jax/output/HTML-CSS/config.js,
- // which can be overriden using the styles values above).
- //
- tooltip: {
- delayPost: 600, // milliseconds delay before tooltip is posted after mouseover
- delayClear: 600, // milliseconds delay before tooltip is cleared after mouseout
- offsetX: 10, offsetY: 5 // pixels to offset tooltip from mouse position
- }
- },
-
- //============================================================================
- //
- // These parameters control the NativeMML output jax.
- //
- NativeMML: {
-
- //
- // This controls the global scaling of mathematics as compared to the
- // surrounding text. Values between 100 and 133 are usually good choices.
- //
- scale: 100,
-
- //
- // This controls whether the MathJax contextual menu will be available
- // on the mathematics in the page. If true, then right-clicking (on
- // the PC) or control-clicking (on the Mac) will produce a MathJax
- // menu that allows you to get the source of the mathematics in
- // various formats, change the size of the mathematics relative to the
- // surrounding text, and get information about MathJax.
- //
- // Set this to false to disable the menu. When true, the MathMenu
- // items below configure the actions of the menu.
- //
- // There is a separate setting for MSIE, since the code to handle that
- // is a bit delicate; if it turns out to have unexpected consequences,
- // you can turn it off without turing off other browser support.
- //
- showMathMenu: true,
- showMathMenuMSIE: true,
-
- //
- // This allows you to define or modify the styles used to display
- // various math elements created by MathJax.
- //
- // Example:
- // styles: {
- // ".MathJax_MathML": {
- // color: "red" // MathML is in red
- // }
- // }
- //
- styles: {}
- },
-
- //============================================================================
- //
- // These parameters control the contextual menus that are available on the
- // mathematics within the page (provided the showMathMenu value is true above).
- //
- MathMenu: {
- //
- // This is the hover delay for the display of submenus in the
- // contextual menu. When the mouse is still over a submenu label for
- // this long, the menu will appear. (The menu also will appear if you
- // click on the label.) It is in milliseconds.
- //
- delay: 400,
-
- //
- // This is the URL for the MathJax Help menu item.
- //
- helpURL: "http://www.mathjax.org/help/user/",
-
- //
- // These control whether the "Math Renderer", "Font Preferences",
- // and "Contextual Menu" submenus will be displayed or not.
- //
- showRenderer: true,
- showFontMenu: false,
- showContext: false,
-
- //
- // These are the settings for the Show Source window. The initial
- // width and height will be reset after the source is shown in an
- // attempt to make the window fit the output better.
- //
- windowSettings: {
- status: "no", toolbar: "no", locationbar: "no", menubar: "no",
- directories: "no", personalbar: "no", resizable: "yes", scrollbars: "yes",
- width: 100, height: 50
- },
-
- //
- // This allows you to change the CSS that controls the menu
- // appearance. See the extensions/MathMenu.js file for details
- // of the default settings.
- //
- styles: {}
-
- },
-
- //============================================================================
- //
- // These parameters control the MMLorHTML configuration file.
- // NOTE: if you add MMLorHTML.js to the config array above,
- // you must REMOVE the output jax from the jax array.
- //
- MMLorHTML: {
- //
- // The output jax that is to be preferred when both are possible
- // (set to "MML" for native MathML, "HTML" for MathJax's HTML-CSS output jax).
- //
- prefer: {
- MSIE: "MML",
- Firefox: "MML",
- Opera: "HTML",
- other: "HTML"
- }
- }
-});
-
-MathJax.Ajax.loadComplete("[MathJax]/config/MathJax.js");
diff --git a/unpacked/config/default.js b/unpacked/config/default.js
@@ -0,0 +1,602 @@
+/*************************************************************
+ *
+ * MathJax/config/default.js
+ *
+ * This configuration file is loaded when there is no explicit
+ * configuration script in the <script> tag that loads MathJax.js
+ *
+ * Use it to customize the MathJax settings. See comments below.
+ *
+ * ---------------------------------------------------------------------
+ *
+ * Copyright (c) 2009-2011 Design Science, Inc.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+/*
+ * This file lists most, but not all, of the options that can be set for
+ * MathJax and its various components. Some additional options are
+ * available, however, and are listed in the various links at:
+ *
+ * http://www.mathjax.org/resources/docs/?configuration.html#configuration-options-by-component
+ *
+ * You can add these to the configuration object below if you
+ * want to change them from their default values.
+ */
+
+MathJax.Hub.Config({
+
+ //
+ // A comma-separated list of configuration files to load
+ // when MathJax starts up. E.g., to define local macros, etc.
+ // The default directory is the MathJax/config directory.
+ //
+ // Example: config: ["local/local.js"],
+ // Example: config: ["local/local.js","MMLtoHTML.js"],
+ //
+ config: [],
+
+ //
+ // A comma-separated list of CSS stylesheet files to be loaded
+ // when MathJax starts up. The default directory is the
+ // MathJax/config directory.
+ //
+ // Example: styleSheets: ["MathJax.css"],
+ //
+ styleSheets: [],
+
+ //
+ // Styles to be defined dynamically at startup time.
+ //
+ // Example:
+ // styles: {
+ // ".MathJax .merror": {
+ // color: "blue",
+ // "background-color": "green"
+ // }
+ // },
+ //
+ styles: {},
+
+ //
+ // A comma-separated list of input and output jax to initialize at startup.
+ // Their main code is loaded only when they are actually used, so it is not
+ // inefficient to include jax that may not actually be used on the page. These
+ // are found in the MathJax/jax directory.
+ //
+ jax: ["input/TeX","output/HTML-CSS"],
+
+ //
+ // A comma-separated list of extensions to load at startup. The default
+ // directory is MathJax/extensions.
+ //
+ // Example: extensions: ["tex2jax.js","TeX/AMSmath.js","TeX/AMSsymbols.js"],
+ //
+ extensions: ["tex2jax.js"],
+
+ //
+ // Patterns to remove from before and after math script tags. If you are not
+ // using one of the preprocessors (e.g., tex2jax), you need to insert something
+ // extra into your HTML file in order to avoid a bug in Internet Explorer. IE
+ // removes spaces from the DOM that it thinks are redundent, and since a SCRIPT
+ // tag usually doesn't add content to the page, if there is a space before and after
+ // a MathJax SCRIPT tag, IE will remove the first space. When MathJax inserts
+ // the typeset mathematics, this means there will be no space before it and the
+ // preceeding text. In order to avoid this, you should include some "guard characters"
+ // before or after the math SCRIPT tag; define the patterns you want to use below.
+ // Note that these are used as regular expressions, so you will need to quote
+ // special characters. Furthermore, since they are javascript strings, you must
+ // quote javascript special characters as well. So to obtain a backslash, you must
+ // use \\ (doubled for javascript). For example, "\\[" is the pattern \[ in the
+ // regular expression. That means that if you want an actual backslash in your
+ // guard characters, you need to use "\\\\" in order to get \\ in the regular
+ // expression, and \ in the actual text. If both preJax and postJax are defined,
+ // both must be present in order to be removed.
+ //
+ // See also the preRemoveClass comments below.
+ //
+ // Example:
+ // preJax: "\\\\\\\\", // makes a double backslash the preJax text
+ // or
+ // preJax: "\\[\\[", // jax scripts must be enclosed in double brackets
+ // postJax: "\\]\\]",
+ //
+ preJax: null,
+ postJax: null,
+
+ //
+ // The CSS class for a math preview to be removed preceeding a MathJax
+ // SCRIPT tag. If the tag just before the MathJax SCRIPT tag is of this
+ // class, its contents are removed when MathJax processes the SCRIPT
+ // tag. This allows you to include a math preview in a form that will
+ // be displayed prior to MathJax performing its typesetting. It also
+ // avoids the Internet Explorer space-removal bug, and can be used in
+ // place of preJax and postJax if that is more convenient.
+ //
+ // For example
+ //
+ // <span class="MathJax_Preview">[math]</span><script type="math/tex">...</script>
+ //
+ // would display "[math]" in place of the math until MathJax is able to typeset it.
+ //
+ preRemoveClass: "MathJax_Preview",
+
+ //
+ // This value controls whether the "Processing Math: nn%" message are displayed
+ // in the lower left-hand corner. Set to "false" to prevent those messages (though
+ // file loading and other messages will still be shown).
+ //
+ showProcessingMessages: true,
+
+ //
+ // This value controls the verbosity of the messages in the lower left-hand corner.
+ // Set it to "none" to eliminate all messages, or set it to "simple" to show
+ // "Loading..." and "Processing..." rather than showing the full file name and the
+ // percentage of the mathematics processed.
+ //
+ messageStyle: "normal",
+
+ //
+ // These two parameters control the alignment and shifting of displayed equations.
+ // The first can be "left", "center", or "right", and determines the alignment of
+ // displayed equations. When the alignment is not "center", the second determines
+ // an indentation from the left or right side for the displayed equations.
+ //
+ displayAlign: "center",
+ displayIndent: "0em",
+
+ //
+ // Normally MathJax will perform its starup commands (loading of
+ // configuration, styles, jax, and so on) as soon as it can. If you
+ // expect to be doing additional configuration on the page, however, you
+ // may want to have it wait until the page's onload hander is called. If so,
+ // set this to "onload".
+ //
+ delayStartupUntil: "none",
+
+ //
+ // Normally MathJax will typeset the mathematics on the page as soon as
+ // the page is loaded. If you want to delay that process, in which case
+ // you will need to call MathJax.Hub.Typeset() yourself by hand, set
+ // this value to true.
+ //
+ skipStartupTypeset: false,
+
+ //============================================================================
+ //
+ // These parameters control the tex2jax preprocessor (when you have included
+ // "tex2jax.js" in the extensions list above).
+ //
+ tex2jax: {
+
+ //
+ // The Id of the element to be processed (defaults to full document)
+ //
+ element: null,
+
+ //
+ // The delimiters that surround in-line math expressions. The first in each
+ // pair is the initial delimiter and the second is the terminal delimiter.
+ // Comment out any that you don't want, but be sure there is no extra
+ // comma at the end of the last item in the list -- some browsers won't
+ // be able to handle that.
+ //
+ inlineMath: [
+// ['$','$'], // uncomment this for standard TeX math delimiters
+ ['\\(','\\)']
+ ],
+
+ //
+ // The delimiters that surround displayed math expressions. The first in each
+ // pair is the initial delimiter and the second is the terminal delimiter.
+ // Comment out any that you don't want, but be sure there is no extra
+ // comma at the end of the last item in the list -- some browsers won't
+ // be able to handle that.
+ //
+ displayMath: [
+ ['$$','$$'],
+ ['\\[','\\]']
+ ],
+
+ //
+ // This array lists the names of the tags whose contents should not be
+ // processed by tex2jax (other than to look for ignore/process classes
+ // as listed below). You can add to (or remove from) this list to prevent
+ // MathJax from processing mathematics in specific contexts.
+ //
+ skipTags: ["script","noscript","style","textarea","pre","code"],
+
+ //
+ // This is the class name used to mark elements whose contents should
+ // not be processed by tex2jax (other than to look for the
+ // processClass pattern below). Note that this is a regular
+ // expression, and so you need to be sure to quote any regexp special
+ // characters. The pattern is automatically preceeded by '(^| )(' and
+ // followed by ')( |$)', so your pattern will have to match full words
+ // in the class name. Assigning an element this class name will
+ // prevent `tex2jax` from processing its contents.
+ //
+ ignoreClass: "tex2jax_ignore",
+
+ //
+ // This is the class name used to mark elements whose contents SHOULD
+ // be processed by tex2jax. This is used to turn on processing within
+ // tags that have been marked as ignored or skipped above. Note that
+ // this is a regular expression, and so you need to be sure to quote
+ // any regexp special characters. The pattern is automatically
+ // preceeded by '(^| )(' and followed by ')( |$)', so your pattern
+ // will have to match full words in the class name. Use this to
+ // restart processing within an element that has been marked as
+ // ignored above.
+ //
+ processClass: "tex2jax_process",
+
+ //
+ // Set to "true" to allow \$ to produce a dollar without starting in-line
+ // math mode. If you uncomment the ['$','$'] line above, you should change
+ // this to true so that you can insert plain dollar signs into your documents
+ //
+ processEscapes: false,
+
+ //
+ // Controls whether tex2jax processes LaTeX environments outside of math
+ // mode. Set to "false" to prevent processing of environments except within
+ // math mode.
+ //
+ processEnvironments: true,
+
+ //
+ // Controls whether tex2jax inserts MathJax_Preview spans to make a
+ // preview available, and what preview to use, when it locates in-line
+ // and display mathetics on the page. The default is "TeX", which
+ // means use the TeX code as the preview (until it is processed by
+ // MathJax). Set to "none" to prevent the previews from being
+ // inserted (the math will simply disappear until it is typeset). Set
+ // to an array containing the description of an HTML snippet in order
+ // to use the same preview for all equations on the page (e.g., you
+ // could have it say "[math]" or load an image).
+ //
+ // E.g., preview: ["[math]"],
+ // or preview: [["img",{src: "http://myserver.com/images/mypic.jpg"}]]
+ //
+ preview: "TeX"
+
+ },
+
+ //============================================================================
+ //
+ // These parameters control the mml2jax preprocessor (when you have included
+ // "mml2jax.js" in the extensions list above).
+ //
+ mml2jax: {
+
+ //
+ // The Id of the element to be processed (defaults to full document)
+ //
+ element: null,
+
+ //
+ // Controls whether mml2jax inserts MathJax_Preview spans to make a
+ // preview available, and what preview to use, whrn it locates
+ // mathematics on the page. The default is "alttext", which means use
+ // the <math> tag's alttext attribute as the preview (until it is
+ // processed by MathJax), if the tag has one. Set to "none" to
+ // prevent the previews from being inserted (the math will simply
+ // disappear until it is typeset). Set to an array containing the
+ // description of an HTML snippet in order to use the same preview for
+ // all equations on the page (e.g., you could have it say "[math]" or
+ // load an image).
+ //
+ // E.g., preview: ["[math]"],
+ // or preview: [["img",{src: "http://myserver.com/images/mypic.jpg"}]]
+ //
+ preview: "alttext"
+
+ },
+
+ //============================================================================
+ //
+ // These parameters control the jsMath2jax preprocessor (when you have included
+ // "jsMath2jax.js" in the extensions list above).
+ //
+ jsMath2jax: {
+
+ //
+ // The Id of the element to be processed (defaults to full document)
+ //
+ element: null,
+
+ //
+ // Controls whether jsMath2jax inserts MathJax_Preview spans to make a
+ // preview available, and what preview to use, when it locates
+ // mathematics on the page. The default is "TeX", which means use the
+ // TeX code as the preview (until it is processed by MathJax). Set to
+ // "none" to prevent the previews from being inserted (the math will
+ // simply disappear until it is typeset). Set to an array containing
+ // the description of an HTML snippet in order to use the same preview
+ // for all equations on the page (e.g., you could have it say "[math]"
+ // or load an image).
+ //
+ // E.g., preview: ["[math]"],
+ // or preview: [["img",{src: "http://myserver.com/images/mypic.jpg"}]]
+ //
+ preview: "TeX"
+
+ },
+
+ //============================================================================
+ //
+ // These parameters control the TeX input jax.
+ //
+ TeX: {
+
+ //
+ // This specifies the side on which \tag{} macros will place the tags.
+ // Set to "left" to place on the left-hand side.
+ //
+ TagSide: "right",
+
+ //
+ // This is the amound of indentation (from right or left) for the tags.
+ //
+ TagIndent: ".8em",
+
+ //
+ // This is the width to use for the multline environment
+ //
+ MultLineWidth: "85%",
+
+ //
+ // List of macros to define. These are of the form
+ // name: value
+ // where 'value' is the replacement text for the macro \name.
+ // The 'value' can also be [value,n] where 'value' is the replacement
+ // text and 'n' is the number of parameters for the macro.
+ // Note that backslashes must be doubled in the replacement string.
+ //
+ // E.g.,
+ //
+ // Macros: {
+ // RR: '{\\bf R}',
+ // bold: ['{\\bf #1}', 1]
+ // }
+ //
+ Macros: {}
+
+ },
+
+ //============================================================================
+ //
+ // These parameters control the MathML inupt jax.
+ //
+ MathML: {
+ //
+ // This specifies whether to use TeX spacing or MathML spacing when the
+ // HTML-CSS output jax is used.
+ //
+ useMathMLspacing: false
+ },
+
+ //============================================================================
+ //
+ // These parameters control the HTML-CSS output jax.
+ //
+ "HTML-CSS": {
+
+ //
+ // This controls the global scaling of mathematics as compared to the
+ // surrounding text. Values between 100 and 133 are usually good choices.
+ //
+ scale: 100,
+
+ //
+ // This is a list of the fonts to look for on a user's computer in
+ // preference to using MathJax's web-based fonts. These must
+ // correspond to directories available in the jax/output/HTML-CSS/fonts
+ // directory, where MathJax stores data about the characters available
+ // in the fonts. Set this to ["TeX"], for example, to prevent the
+ // use of the STIX fonts, or set it to an empty list, [], if
+ // you want to force MathJax to use web-based or image fonts.
+ //
+ availableFonts: ["STIX","TeX"],
+
+ //
+ // This is the preferred font to use when more than one of those
+ // listed above is available.
+ //
+ preferredFont: "TeX",
+
+ //
+ // This is the web-based font to use when none of the fonts listed
+ // above are available on the user's computer. Note that currently
+ // only the TeX font is available in a web-based form. Set this to
+ //
+ // webFont: null,
+ //
+ // if you want to prevent the use of web-based fonts.
+ //
+ webFont: "TeX",
+
+ //
+ // This is the font to use for image fallback mode (when none of the
+ // fonts listed above are available and the browser doesn't support
+ // web-fonts via the @font-face CSS directive). Note that currently
+ // only the TeX font is available as an image font. Set this to
+ //
+ // imageFont: null,
+ //
+ // if you want to prevent the use of image fonts (e.g., you have not
+ // installed the image fonts on your server). In this case, only
+ // browsers that support web-based fonts will be able to view your pages
+ // without having the fonts installed on the client computer. The browsers
+ // that support web-based fonts include: IE6 and later, Chrome, Safari3.1
+ // and above, Firefox3.5 and later, and Opera10 and later. Note that
+ // Firefox3.0 is NOT on this list, so without image fonts, FF3.0 users
+ // will be required to to download and install either the STIX fonts or the
+ // MathJax TeX fonts.
+ //
+ imageFont: "TeX",
+
+ //
+ // This controls whether the MathJax contextual menu will be available
+ // on the mathematics in the page. If true, then right-clicking (on
+ // the PC) or control-clicking (on the Mac) will produce a MathJax
+ // menu that allows you to get the source of the mathematics in
+ // various formats, change the size of the mathematics relative to the
+ // surrounding text, and get information about MathJax.
+ //
+ // Set this to false to disable the menu. When true, the MathMenu
+ // items below configure the actions of the menu.
+ //
+ showMathMenu: true,
+
+ //
+ // This allows you to define or modify the styles used to display
+ // various math elements created by MathJax.
+ //
+ // Example:
+ // styles: {
+ // ".MathJax_Preview": {
+ // "font-size": "80%", // preview uses a smaller font
+ // color: "red" // and is in red
+ // }
+ // }
+ //
+ styles: {},
+
+ //
+ // Configuration for <maction> tooltips
+ // (see also the #MathJax_Tooltip CSS in MathJax/jax/output/HTML-CSS/config.js,
+ // which can be overriden using the styles values above).
+ //
+ tooltip: {
+ delayPost: 600, // milliseconds delay before tooltip is posted after mouseover
+ delayClear: 600, // milliseconds delay before tooltip is cleared after mouseout
+ offsetX: 10, offsetY: 5 // pixels to offset tooltip from mouse position
+ }
+ },
+
+ //============================================================================
+ //
+ // These parameters control the NativeMML output jax.
+ //
+ NativeMML: {
+
+ //
+ // This controls the global scaling of mathematics as compared to the
+ // surrounding text. Values between 100 and 133 are usually good choices.
+ //
+ scale: 100,
+
+ //
+ // This controls whether the MathJax contextual menu will be available
+ // on the mathematics in the page. If true, then right-clicking (on
+ // the PC) or control-clicking (on the Mac) will produce a MathJax
+ // menu that allows you to get the source of the mathematics in
+ // various formats, change the size of the mathematics relative to the
+ // surrounding text, and get information about MathJax.
+ //
+ // Set this to false to disable the menu. When true, the MathMenu
+ // items below configure the actions of the menu.
+ //
+ // There is a separate setting for MSIE, since the code to handle that
+ // is a bit delicate; if it turns out to have unexpected consequences,
+ // you can turn it off without turing off other browser support.
+ //
+ showMathMenu: true,
+ showMathMenuMSIE: true,
+
+ //
+ // This allows you to define or modify the styles used to display
+ // various math elements created by MathJax.
+ //
+ // Example:
+ // styles: {
+ // ".MathJax_MathML": {
+ // color: "red" // MathML is in red
+ // }
+ // }
+ //
+ styles: {}
+ },
+
+ //============================================================================
+ //
+ // These parameters control the contextual menus that are available on the
+ // mathematics within the page (provided the showMathMenu value is true above).
+ //
+ MathMenu: {
+ //
+ // This is the hover delay for the display of submenus in the
+ // contextual menu. When the mouse is still over a submenu label for
+ // this long, the menu will appear. (The menu also will appear if you
+ // click on the label.) It is in milliseconds.
+ //
+ delay: 400,
+
+ //
+ // This is the URL for the MathJax Help menu item.
+ //
+ helpURL: "http://www.mathjax.org/help/user/",
+
+ //
+ // These control whether the "Math Renderer", "Font Preferences",
+ // and "Contextual Menu" submenus will be displayed or not.
+ //
+ showRenderer: true,
+ showFontMenu: false,
+ showContext: false,
+
+ //
+ // These are the settings for the Show Source window. The initial
+ // width and height will be reset after the source is shown in an
+ // attempt to make the window fit the output better.
+ //
+ windowSettings: {
+ status: "no", toolbar: "no", locationbar: "no", menubar: "no",
+ directories: "no", personalbar: "no", resizable: "yes", scrollbars: "yes",
+ width: 100, height: 50
+ },
+
+ //
+ // This allows you to change the CSS that controls the menu
+ // appearance. See the extensions/MathMenu.js file for details
+ // of the default settings.
+ //
+ styles: {}
+
+ },
+
+ //============================================================================
+ //
+ // These parameters control the MMLorHTML configuration file.
+ // NOTE: if you add MMLorHTML.js to the config array above,
+ // you must REMOVE the output jax from the jax array.
+ //
+ MMLorHTML: {
+ //
+ // The output jax that is to be preferred when both are possible
+ // (set to "MML" for native MathML, "HTML" for MathJax's HTML-CSS output jax).
+ //
+ prefer: {
+ MSIE: "MML",
+ Firefox: "MML",
+ Opera: "HTML",
+ other: "HTML"
+ }
+ }
+});
+
+MathJax.Ajax.loadComplete("[MathJax]/config/default.js");
